Commercial Fluid Power Newsletter
July 2010
CFPHeader
In This Issue
Green Chemistry Awards
CPOD Specials
Contact Information
Aircraft Parts
 Aircraft Parts

 



Quick Links
Aircraft Parts


SpaceShuttleLaunchTube

Spac`e Shuttle Launch Tube 5

Space Shuttle Launch Tube 6

PresidentialHeader

The Presidential Green Engineering Awards were held again this year in Washington DC this past June. This is a competitive awards program, administered by the Environmental Protection Agency and sponsored in part by the American Chemical Society, provides national recognition for incorporating the principles of green chemistry and green engineering into the design, manufacture, and use of chemical products and processes to help achieve federal pollution-prevention goals.

Commercial Fluid Power was recognized for developing and promoting Nitro-tuff tubing and bar products.  Nitro-tuff tubing and bar products are an ECO friendly alternative to standard chrome plated products.  The waste product from nitriding is WATER.

One of the significant developments in the world of nitriding is the ability to now coat stainless steel.  This has been done by tight atmospheric controls and can now replace chrome plated stainless steel products without any loss of corrosion to the base material.

A synopsis of all entries and award winners can be found at the following link.  Commercial Fluid Power synopsis can be found on page 18.

Presidential Green Engineering Awards Summary


Chrome Plated Only (CPOD)

T-2.500" x 2.000" CPOD       T-4.000" x 3.500" CPOD
T-3.000" x 2.250" CPOD       T-4.500" x 3.750" CPOD
T-3.250" x 2.750" CPOD       T-4.500" x 4.000" CPOD
T-3.750" x 3.000" CPOD       T-5.000" x 4.500" CPOD
T-3.750" x 3.250" CPOD       T-5.500" x 4.750" CPOD
T-4.000" x 3.000" CPOD       T-6.000" x 5.250" CPOD
T-4.000" x 3.250" CPOD       T-6.000" x 5.500" CPOD

 Call: (414) 418-3629 for pricing and availability.
Material Grade: St52.3 SRA DOM Produced to ASTM A513 Type 5
Chromium 0.001" per side standard  Mill Test Certificates.
Aircraft Parts 

Commercial Fluid Power can gun-drill, drill, trepan, bore, hone, skive and skive and roll your ID tubing requirements.  We can process our tubing to your specifications or we can process your material from one piece to truck load quantities. 

We are familiar with standard carbon and stainless steel grades as well as tougher material grades such as Renee 41 or Titanium. Call your nearest Commercial Fluid Power location for more information on our ID processing capabilities.
 Commercial Fluid Power Contact Information
 Ohio Area    (800) 346-2601      Fax: (330) 343-6391
 Chicago       (800) 358-8466      Fax: (219) 324-5105
 PA Area       (800) 458-3847      Fax: (814) 827-6678
 Atlanta         (800) 766-6066      Fax: (706) 232-2564
Join Our Mailing 
List
Safe Unsubscribe
This email was sent to bobrick@commercialfluidpower.com by bobrick@commercialfluidpower.com.
Commercial Fluid Power | 2997 Progress Drive | Dover | OH | 44622