Skive and Roller
Burnishing
Skive and Roller
Burnishing is the
process of finishing the
ID of a tube to a
cylinder quality size
and finish by means of
carbide inserts and
rollers. The Skive and
Roller Burnishing are
two separate operations
that employ the same
tool.
Skiving in itself is a
process used to remove
stock where close
tolerances and roundness
are required. Skiving
produces a surface
finish of approximately
60 to 125 micro-inches
CLA. The depth of cut
can range from as little
as 0.002 inch per side
and as much as 0.040
inch per side depending
on the size of the tool.
Skiving also produces
optimal peak and valley
patterns for subsequent
roller burnishing.
Roller Burnishing
can follow the Skive
operation. This
operation employs
rollers which causes
material to flow
from the "peaks"
into the "valleys".
The burnishing
process produces a
more condensed and
refined surface
finish which reduces
seal friction and
surface porosity.
Commercial Fluid Power
can Skive or Skive and
Roller Burnish lengths
to 24 feet. Interior
diameters can be skived
and rolled as small as
1.500" and as large as
12.000". Call your
nearest CFP location for
more information.
|
|
DUCTILE IRON OVER
STOCK
Commercial Fluid Power
had partnered with UCB
before they had pulled
their support out of the
US. Commercial Fluid
Power has several select
prime size available.
Overstock items this
month.
65-45-12 1.250", 1.500",
1.750", 2.000", 2.250",
2.750", 3.250",
3.500",
3.750", 4.250", 4.500",
4.750", 5.000", 5.250",
5.500",
5.750", 6.000", 6.500",
7.000", 7.500", 11.000",
12.000",
16.000" and 18.000"
80-55-06 4.500", 5.500",
5.750", 6.250", 6.500",
7.000", 7.500",
9.000",
10,000" and 11.000".
Material will be sold at
truck load prices for
single piece quantities.
Call: (414) 418-3629 for
price and availability
|
